Schütte Rollo top clips hacky scale for snug fit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Variation mainly to have 90 degree angles and a snug fit for 12mm window not going over the sealing rubber.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 79
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Public Domain
Schütte/Schuette rollo blinds window clip that goes above window. I wanted it (a) because the original broke and (b) because being above takes less space meaning the door can open further if it opens indoors towards a door frame.
Original model seemed for angled window frame. This is just rectangular and I modified it to not go over the rubber seal, but rather hook behind it but very little. It also includes the pins, although I don't think they do much (I have a day/night double layered roller blind).
Also scaled very slightly, as the original model for me was 0.5mm small: Possible to use but too snug (at least for the central one).
(Yeah, this is a a very hacky remix, created just in Prusa slicer with negative volumes and manually moving around and import/export STL to make it the right width. -- thus it has a bit funny ridges at points.)
Printed it with PETG. Seems to hold so well enough that no glue is needed.