Navee GT3 E-Scooter - Throttle Upgrade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My thumb got sore after driving long distances, so i made this to convert the throttle to a Motorcycle style throttle
- Ocena
- 4 / 5
- Polubienia
- 13
- Pobrania
- 170
- Wydruki
- 2
- Wyświetlenia
- 573
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Driving the E-scooter for long period may strain your thumb muscles. So I made this adapter to convert the thumb throttle to a motorcycle style throttle. I tried my best to get the tolerances correct but after printing you might need to sand the bushing a bit for a smooth throttle.
I printed the throttle in PETG. but can also be printed in ASA/ABS.
When it came to support - i used Manual Settings just to support the thumb gaurd as shown in pic.
You will need:
Vaseline (As a lube)
Sanding paper.
Assembly:
Slide the spacer on handle against the throttle. (make sure that the fillet is on the outside)
Lube the inside of the throttle.
Slide the Bushing into the Throttle.
Slide the whole bushing/throttle over the handle againt the spacer.
Note: The less you sand the bushing and inside of the Throttle the more resistance you will get, this in return will act as semi cruise control, but in my opion - sand it smooth as these scooters can be a death trap with cruise control in general.
I hope you like this, but incase you want to make your own adjustments please see the Onshape link.
Have fun!