Pole-Mounted Radiosonde Line Cutter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pole-mounted radiosonde line cutter for telescopic fishing poles, with retractable hooked utility blade.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 87
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A pole-mounted line cutter for radiosonde recovery. The tool attaches to the tip of a telescopic fishing pole and helps pull, guide, or cut the line, parachute cord, or balloon remnant when a radiosonde is caught in a tree or other hard-to-reach place.
It uses a hooked utility blade that can be retracted for carrying or extended for cutting. The tapered chuck-style clamp grips the carbon-fibre pole tip, while the small hole can be used for a safety tether or control line.
Print in ABS with a 0.4 mm nozzle. You will also need an M3 screw and a cap nut for the blade/clamp assembly.
For more information, see the full article:
https://motleyscience.com/2026/04/26/radiosonde-hunting-with-a-fishing-rod/
Use with care: this is a sharp blade on a long pole. Never use it near people, animals, vehicles, glass, or overhead power lines.