AcuRite 01525 Personal Weather Station Pole Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple pole mount for an AcuRite 01525 Personal Weather Station. One end is shoved up the sensor's hole...…
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 50
- Wydruki
- 1
- Wyświetlenia
- 486
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple pole mount for an AcuRite 01525 Personal Weather Station. One end is shoved up the sensor's hole... while the other end slips over the pipe's shaft. ;)
I believe the metal pipe I am using is 1-1/2" OD.I have included holes for use with the screws supplied with the station to secure it to the mount. There is also a hole in the lower portion for use with a 5mm screw to help secure the mount to the pole.
I suggest using PETG since this will need to survive the heat and the cold; dry spells and rainy seasons; fire and ice... well, maybe not that last one.
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Supports:
No
Resolution:
0.2mm
Infill:
70%
Category: Sport & Outdoors