DIN Rail mount for a Shelly EM Gen3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DIN Rail mount for a Shelly EM Gen3 that allows both CTs and all 4 wires to be connected.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 246
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- GNU General Public License v3.0
I wanted a DIN rail mount for a Shelly EM Gen3 - while there were GEN3 mounts, many didn't fit correctly.
I liked the compliant mechanism in one, but it did not fit the CT connections that the EM has.
I liked the simple DIN clip mechanism, but the models just didn't easily fit the Shelly EM Gen3.
So what was I to do? I made my own taking inspiration from the models that almost had what I wanted.
Uploaded as an F3d archive, a STEP file, and an STL. Model is parametric, so you can adjust the size of the envelope the module sits in, if you need the sizes to be different to fit your distribution board.
This design also allows the reset/wifi-enable button on the rear of the unit to be pressed.
Hat Tip to the following models for inspiration. I took the ideas I liked from each, and built this DIN mount.