Mossberg 590A1 limiter plug
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A plug to keep in place the limiter in the magazine tube
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 61
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
The limiter that came with my Mossberg 590A1 was a 5mm thick metal rod with a disc welled at one end. Right away there was an issue with the metal rod being misaligned with the center of the magazine tube. The big issue came later when the disc holding it in place broke so the rod just fell in the tube. I designed a plug that holds the rod secure in place. Simple design, does not need supports to print it. I used PETG for better thermal efficiency with 1 outside layer and 100% infill.
I designed 2 models, one for Mossbergs with a flat end magazine tube end and another for the 590A1 with thick screw. Never tested the flat one, I don't have access to that shotgun. The second one fits like a glove and does not need that metal pin to keep it safe in place.