Quad 5050smd Gasket for S2+ Mule
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gaskets for 5050 quad mule using Convoy S2+ host
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 70
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These gaskets can be used for a quad 5050 mule flashlight in a Convoy S2+ host using the "20 x 1.6mm 4P QUAD 5050SMD" MCPCB from JLHawaii and the 20mm mule adapter file from here.
There are three files, depending on the spacing you need when used with the 20mm mule adapter/spacer:
4.5mm "S2+ Stock" matches the pill+reflector height of a stock Convoy S2+
4mm "FFL5009D" can be used with domed 5050 emitters, placing the dome just 0.5mm under the glass lens
3mm "Domeless" can be used with flat 5050 emitters such as the SFT40 or FFL5009R, placing the emitter surface 2mm under the glass lens
Use a filament resistant to heat. I used ASA, printed at 0.1mm layers with 0.4mm nozzle.
Credit for the initial MCPCB and mule adapter designs go to u/Due_Tank_6976 on Reddit.