Vintage Center Drawer Slide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable drawer slide for vintage dressers or cabinets that use a center rail style slide/support.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 58
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution
This was designed to fit a dresser with an internal drawer depth of 355mm (14") and a inner dresser depth of 400mm (15 7/8"). I have included the .stl files and you can also find an a public editable version on OnShape if you wish to customize for your own vintage drawer project.
The parts print in place with no supports or brims needed. I used wood PLA for this to keep with the original aesthetic of the dresser, but I think you could use virtually any material.
The groove and slide halves are designed to interlock and glued together with super glue. The groove side attaches to the drawer bottom, I've found hot glue to be very effective at bonding it.
Finally attach the slide support with 2 screws into your dresser's rails and slide the drawer on.