Gartenbewässerung - Schlüssel für / garden irrigation - spanner tool for Rainbird filter LCRBY100D
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A ring spanner to open the 1" filter housing of the rainbird garden irrigation system
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 96
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Ein simpler Ringschlüssel für das Filtergehäuse (Typ LCRBY100D und ggf. andere mit demselben Deckel) einer Rainbird-Bewässerunganlage, da es ein Krampf ist, den Filter nur mit den Händen zur Reinigung zu entnehmen.
Wie üblich bei solchen Werkzeugen, ebenso wie beim Ölfilter am Auto bitte die folgende Regel beachten:
aufdrehen mit dem Werkzeug
zudrehen nur mit der Hand!!
Meiner ist aus PETG gedruckt und funktioniert einwandfrei - ggf. die Innenkontur ein wenig glattschleifen.
Die innere Öffnung des Schlüssels ist leicht konisch konstruiert, damit er gut am Deckel anliegt. Daher bevorzugt wie im Bild mit dem Griff zum Anwender hin aufsetzen.
---
A simple ring spanner for the filter housing (type LCRBY100D and others twith the same lid) of a rainbird irrigation system, because it is a PITA to remove the filter for cleaning just with your hands.
As usual with such tools, keep the same rule as with the oil filter of a car in mind:
open with the tool
close using only your hand!
I printed the tool with PETG and it works nicely - if necessary, slighly sand the inner contour.
The inner opening is slightly conical, therefore place the spanner as shown in the picture with the handle facing to you.