Betty Boop
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This image of the iconic Betty Boop is in response to a request on Reddit. I haven't had a chance to print it yet, so…
- Ocena
- 4,667 / 5
- Polubienia
- 26
- Pobrania
- 323
- Wydruki
- 4
- Wyświetlenia
- 1677
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This image of the iconic Betty Boop is in response to a request on Reddit. I haven't had a chance to print it yet, so I ask that if any of you make this, PLEASE post a make!
-=[ EDIT ]=-
There was an error where the right eye was not high enough for the black color layer so I have fixed that and re-uploaded it. After I did this, I noticed that the original looked a little thick. I like my girls a little thick, but for those of you who do not, I have uploaded a thinner version, with 0.6mm layers instead of 1.2mm layers of the original. Please see the printing notes for the revised color change points.
NOTE Due to either a Thingiverse bug or (more likely) shadowbanning, my models no longer show up under the [Newest] listings. If you want to see more of my models, please be sure to 'follow' me.
Another Sketchup Model - Debunking the Myth that Sketchup is Useless in 3D Printing
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Supports:
No
Resolution:
0.2mm - 0.3mm
Infill:
10%
Notes:
This is designed so that it can be printed at either 0.2mm or 0.3mm while still allowing for easy to calculate color changes. For optimal printing pleasure, use the following colors/layers for color swaps (based on a layer height of 0.2mm):
**Original Thickness Model**Layer 0: white
Layer 6: skin
Layer 12: gold
Layer 18: red
Layer 24: black
New Thinner Version
Layer 0: white
Layer 3: skin
Layer 6: gold
Layer 9: red
Layer 12: black
Category: Signs & Logos