4" dust port for Ridgid Table Saw TS-3650
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This replaces the small dust port on the Ridgid Table Saw TS-3650 with a 4" port sized for dust collectors.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 59
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
A table ought to have ~400 CFM of dust collection. The Ridgid Table Saw TS-3650 comes with a shop-vac sized dust port, and while that helps, a shop vac is lucky to pull even half that air flow. This replacement port allows the full flow of a 4" dust collector. It really sucks! It uses the 4 original screws and needs no modification to the saw.
The model is coded in Python using Build123D. The .py file is included in case you want to modify for a different saw or duct diameter.
The print is 145x190x135 and uses ~175g of filament in PETG. I threw in a few extra perimeters on top, bottom and sides, and bumped up the infill some because my saw gets rolled around the shop, dragging the hose. When installing the hose clamp, be sure to position the clamp's buckle to avoid the saw frame when the trunnion is tilted.
