Unifi G5 Turret Desktop Base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Angled desktop base for UniFi G5 Turret Ultra. Features cable management and a secure, upright PoE port mount.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 160
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
A functional desktop stand designed for the UniFi G5 Turret Ultra. It elevates and angles the camera mounting plate to provide a significantly better field of view when placed on flat surfaces like desks, shelves, or countertops, rather than being limited to a ceiling/wall mount.
Features
The base features an alignment tab that interfaces with the camera’s cable passthrough notch.
The hollow interior provides space to coil the excess PoE pigtail cable.
The rear opening is precision-modeled to hold the PoE port in a vertical orientation.
The bottom cover plate acts as a retention mechanism for the PoE port body. This prevents the port from being pushed into the base when connecting or disconnecting your Ethernet cable.
Uses the standard mounting plate and screws included in the G5 Turret Ultra box.
The bottom plate is secured using two M3 thread-forming plastic screws. If you don't have these on hand, the tolerances are designed such that most spare M3-adjacent screws from your parts bin will likely work.
The mounting plate for the G5 Turret Ultra is attached using the screws included in the box.
