12.55mm Clothes Airer Foot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement foot for generic clothes airers/drying racks. See description for parametric model for other sizes
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 21
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
Replacement foot for generic clothes airers/drying racks with a 12.55mm leg diameter. This is the common model of clothes airer sold in uk supermarkets. Mine was bought in Sainsbury's, but I have seen identical models in other shops. Measure the leg diameter of yours first to be sure.
I have made this foot replacement to be more robust than the easy to lose rubber caps that always fall off this kind of clothes airer.
Print with the large side up and a 10mm+ brim for best results. I haven't had any issues with scratching on a hardwood floor with PLA, but if you are worried, you could try printing with a firm TPU (leave a comment with your result, as I haven't tried this).
For other sizes, you can edit the leg_diameter variable in the following Onshape model: https://cad.onshape.com/documents/92d5682b99e2ad495cc225b4/w/1972f4c522c22faaf4e11370/e/9a5937cc2f7267ce25766a60