The L.A.M.P. with a spool heart
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
>>> Light - Attention - Means - Printables <<< for hanging on the wall
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 218
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Open Community License v1
EDIT 28.04.2026 files: LAMP_spool_cover_
Printed on Prusa CORE One L after a week of designing with 36 liters of coffee...
This project supports 2 types of spools: old and NEW!!!
The project allows the use of a manual or remote-controlled LED switch/controller.
Filaments used:
Orange: PETG Prusa Orange (Prusament)
White: PCTG (Fiberlogy)
Used additionally:
magnets: 10x1,5 mm (x11) & 3x4 mm (x15)
screws: fi 2,5mm L 12 mm (x6)
2.5 m LED strip with accessories
This video was taken while assembling the old spool, as I wanted to test the adaptability.
Below is a clip of the footage using the new spool.
Prototyping was also done on an new-type spool - 4 mm narrower then the older one:
More printing videos on mine Tiktok (link in my profile).
Happy printing!