1 / 2
Plant Stake - Improved Version
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print in place stake with integrated "zip tie"'s
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 71
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed this lightweight stake to support smaller plants in early stages of growth without needing any string or ties. Works great on seedlings all the way on up to decent sized house plants.
Designed to print at .3mm layer height and .4mm line width. PLA is fine for indoor plants. PET-G or similar for outdoor.
Suggest printing with 110% flow rate to ensure zip ties are fused properly.
Cut away excess "zip tie" or weave into itself for better aesthetics.
