1 / 2
Cord stop for heavy duty 10mm x 20mm x 1.2mm 7 coil springs
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple cord stop, remixed to accommodate heavy duty 10mm x 20mm x 1.2mm x 7 coil spring.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 55
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A great design by @Mape but it wouldn't fit the heavy duty spring 10mm x 20mm x 1.2mm x 7 coil spring that I have. I shortened the piston from 16mm to 12mm so it would fit.
This spring is very strong. If you want to the spring to be a little less strong, especially if you have thicker cords, use one of the longer shells (respectively, 1mm and 2mm longer).
Print in PETG and with 100% infill for strength.