3D DRAGON EGG | Minecraft 3D Print
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Create your own 3D Dragon Egg inspired by Minecraft! This model is perfect for 3D printing and works great as decoratio
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 129
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Public Domain
Recommended Printer Settings:
* Layer Height: 0.2 mm
* Infill: 10–15% (Grid or Gyroid)
* Wall Thickness: 1.2 mm (3 perimeters)
* Top/Bottom Layers: 4–5
* Nozzle: 0.4 mm
* Print Speed: 50–60 mm/s
Material:
* PLA (recommended for best results)
Supports:
* Not required
Adhesion:
* Skirt or Brim (optional for better stability)
---
Printing Instructions:
* Print the model in an upright position (as shown in preview)
* Ensure good bed leveling before printing
* Use a stable surface to avoid vibrations
* Allow the print to cool before removing from the bed
---
Post-Processing (Optional):
* Light sanding for smoother finish
* Apply primer and paint for enhanced details
* Use matte or glossy finish depending on preference
---
Estimated Print Info:
* Print Time: ~3–6 hours (depends on size & speed)
* Filament Usage: ~50–100g
---
Notes:
* Scale the model if needed before slicing
* Designed for easy and clean printing
* Perfect for decoration or display