Universelle Halterung für Kinderfahrrad und Laufrad am Lastenrad
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
passend für Babboe, Bakfiets, Muli, Riese & Müller, Cangoo, Yoonit, Tern GSD und viele weitere Cargobike Modelle
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 93
- Wydruki
- 0
- Wyświetlenia
- 333
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
Bike Hook for Cargo Bikes (Inspired Design)
This is a 3D-printable S-shaped hook designed to hold small bikes or balance bikes on the outside of a cargo bike. The design is inspired by commercially available cargo bike holders, but fully remodeled and optimized for FDM 3D printing.
It allows you to mount a child’s bike externally instead of placing it inside the cargo box—freeing up space and keeping the interior safer and less cluttered.
Features
External bike mounting
Keeps the cargo box interior clear and safer for passengersSimple hook design
No tools, no moving parts—just hook it on and goFast installation
Attaches in seconds to the side wall of a cargo boxOptimized for 3D printing
Designed with wall thickness and geometry suitable for FDM printersLightweight but strong
Suitable for everyday use when printed with proper settings
Dimensions
Total length: 174 mm
Width: 20 mm
Depth: 20 mm
Upper hook clearance: ~32 mm (fits up to ~30 mm wall thickness)
Lower hook clearance: ~49 mm (for bike frame / wheel)
Notes on Design
This model is inspired by an existing product, but recreated from scratch for 3D printing
Internal structure is simplified—strength comes from:
wall thickness
print settings
material choice
No molded reinforcement lattice is included (not needed for FDM printing)
Printing Recommendations
Material:
PETG (recommended for durability and flexibility)
PLA (works, but less impact-resistant)
Settings:
4–5 perimeters
25–35% infill (gyroid or cubic)
0.2 mm layer height
Orientation (IMPORTANT):
Print on its side, so layer lines follow the curve
Load & Safety
Designed for light to moderate loads (e.g. children’s bikes)
In my use case: ~3 kg per hook (bike supported by two hooks)
Important:
Strength depends heavily on print quality and material
Always test carefully before regular use
Not intended for heavy-duty or safety-critical applications
Compatibility
Fits most cargo bike box walls up to ~30 mm thickness.
Works well for:
Children’s bikes
Balance bikes
Lightweight frames
Disclaimer
This is an independent, community-made model inspired by an existing concept.
It is not affiliated with or endorsed by any manufacturer or brand.