Guition 10.1" ESP32P4 / JC8012P4A1C Picture Frame (with Optional Wood Grain)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This design transforms the bare hardware into a sleek, finished piece for your desk or wall.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 394
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
This remix wraps the Guition 10.1" / JC8012P4A1C display in a clean, frame-style housing suitable for wall mounting or desktop use.
What's in the download:
Source: STEP files are provided so you can adjust the dimensions or mounting points to fit your specific needs.
Finish: I've uploaded STLs with and without the wood grain texture. The texture was generated using "wood 1" pattern from bumpmesh.com if you want to experiment with different patterns.
3MF: Plate files are included for easy printing the wood pattern frame.
You will need 6x M2.5x8mm fasteners to attach the mount to the display panel. Additionally you will need one or two small nail to attach the mount to the wall. You will need 8x M3x12mm fasteners to assemble the frame. If you are using the kickstand, you will need 4x M3x12mm fasteners and 4x M3x18mm fasteners instead.
Printing Notes:
Designed to look best when printed with wood-fill PLA or a matte brown filament.
No supports required for the frame itself.
Print as oriented for best result.
Printing the Wood-Grain Version:
Layer Height: Using 0.15mm or lower helps capture the detail of the bumpmesh texture significantly better than thicker layers.
Check out espframe which turns the Guition display into a full-featured Immich photo frame!
Can also be used with this ESPHome Weather Dashboard