Ball Bearing Inline filament Sensor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a bidirectional filament sensor I created for my MMU System.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Open Community License v1
This is a inline filament switch that uses a ball bearing.
I just have not been happy with most designs out there, so I decided to create a reliable switch.
The switch is also Bi-Directional.
This model was created in Blender, so sorry I don't have a CAD file to share.
It incorporates cheap momentary switches, I got 20 on Amazon for $6
It also uses a 4.5mm ball bearing. 2 - 2mmx10mm screws.
You will also need 2 ECAS fittings as well.
I printed it with ABS simply because that's what I had loaded at the time, I am sure PLA/PETG would suffice just as well.
.2 Layer
20% infill
6 walls
This is just how I printed it, it is not a recommendation.
This is my first upload, comments are welcome and appreciated!