Arris BGW210 19" Rack Mount 2U Bracket

I created this bracket to mount my Arris BGW210 (AT&T Residential Gateway) in my 19" equipment rack. I designed it as a one piece model which can be easily cut into two halves of exactly half the size for ease of printing (refer to the pics). The halves are then assembled using M4 screws & nuts. You can use the slicer (I use Bambu) to cut it into half right down the middle stanchion. I found it very helpful to add some connectors during the cut process to make alignment easier during assembly.

PRINTING NOTES

I used Bambu PETG-HF Black to print this model.

Default Bambu settings wors fine.

For nicer angled edges: Use Gyroid infill & Minimum Sparse Infill Threshold of 50 mm sq. 

I have already oversized the model for any shrinkage that is to be expected when using Bambu PETG-HF. Sunlu PETG High Speed worked great as well.

FILES

A .3mf file with the model precut, including connectors

An .stl file with the model as a single piece that you can cut yourself.

ASSEMBLY

You will need:

12 x M4-0.7x12mm Hex Socket Head Screws (DIN912)

12 x M4-0.7 Hex Nuts (DIN934)

Optional & additional 2 x M4-0.7x120mm Hex Socket Head Screws & 2 x M4-0.7 Hex Nuts

You will need to remove the rubber feet of the BGW210 of its horizontal orientation. You can leave the vertical orientation rubber feet in if you like a snug fit. In that case, sandwich the BGW210 between the halves during assembly.