DIY Art | Chambre 001
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
32 x 27 x 6 cm 3D-printable sculpture by Tokyo-based artist V-XL
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 39
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Open Community License v1
The Open Chambre series is a collection of 3D-printable sculptures released as open-source art by Tokyo-based artist V-XL (Baptiste Tavernier).
Explore the Full Archive!
More projects are available on the official terminal: https://v-xl.art
Artist: V-XL
Format: 32 x 27 x 6 cm ; Optimized for FDM 3D printing.
Printer: Parts were kept small on purpose, so they should fit on a Mini if you don't have a regular size printer.
***********************
🛠 PRINTING PROTOCOLS
Aesthetics: Optimized for any material. Standard Color Scheme: black frame with high-vis blue and red accents; white specimen
Hardware: All V-XL modules utilize M3 x 8mm screws and M3 square nuts (5.5 x 5.5 x 2.6mm) for fastening.
Specs: 0.4mm nozzle recommended. Use a brim to ensure structural integrity and prevent warping when printing the base.
This module is divided into several files.
—First, print the 4 "Base" files (Standard Color Scheme: black). They do not need supports, but a brim can help stabilize the base onto the printer’s plate.
— Fasten the Base modules with M3 x 8mm screws and M3 square nuts (5.5 x 5.5 x 2.6mm)
— Then print the Diamond (x4) and all the Inlay files (S.C.S.: blue or red). You will need to print Diamond inlay 4 times ; glue all the inlays into the Base
— Then print all the "specimen“ in files (S.C.S.: white). You should not need supports normally.
— Glue the specimen to the base
————— © V-XL // Baptiste Tavernier