Angled Space Saving Stand for the YLL IH 3.0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An angular space saving stand for the YLL IH 3.0.
- Ocena
- 0 / 5
- Polubienia
- 5
- Wydruki
- 0
- Wyświetlenia
- 83
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Standard Digital File License
I like to have my YLL IH 3.0 at an angle: it helps with camera shots, it reduces passive terpene loss during heating by angling the rising heat away from the material, and it saves space on a surface. I designed this little captive angular stand to suit my purposes and it has worked out beautifully. It has a captive channel at the base with fins flanking either side to keep the IH in a stable and usable, angular position.
You can see it in use in my newer YouTube videos.
Print Settings:
0.2mm Layer Height should be fine, but 0.15mm Layer Height will look best.
20% Cubic Infill
4 Perimeters
Print in the saved, upright orientation (bottom on the printbed).
Will require supports for overhangs; tree supports are best.
Uses ~111g of filament (before supports).