1 / 1
Deniax's Talisman Boardgame V4 Card Box Storage (+ expansions) — zdjęcie 1

Deniax's Talisman Boardgame V4 Card Box Storage (+ expansions)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Decks for storing the official Talisman: Revised 4th Edition / Talisman V4 card decks and expansions.

Ocena
5 / 5
Polubienia
8
Pobrania
13
Wydruki
1
Wyświetlenia
127
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Attribution

Remixed from deniax’s gorgeous original Talisman Boardgame V4 Card Box Storage models : huge thanks for creating and sharing them. The original project was made for storing the official Talisman: Revised 4th Edition / Talisman V4 card decks and expansions.

I fixed the STL files so they can be sliced and printed properly in modern slicers. The original files caused issues for some people, likely because of mesh problems/non-manifold geometry that newer slicers handle less forgivingly.

These repaired versions should now load and slice correctly. I manually remeshed the models and tried different repair/remesh thresholds for each file to get the best result I could. Because of that process, the surface quality may vary slightly and may be a bit lower in some areas compared with the original model.

That said, I printed them at 0.2 mm layer height and the result looks pretty good.

Recommended print settings:

Nozzle: 0.4 mm

Layer height: 0.2 mm

Supports: not needed when I printed mine

As always, check the slicer preview before printing

I also made a special version of the purchase deck designed for the base game + stables only, since I do not own the Dungeon or City expansions, a tragic situation, especially since everyone knows they are out of print :)

All credit for the original design goes to deniax https://www.thingiverse.com/thing:3092935