Replacement Insert for Magnetic Foil & Plastic Wrap Dispensers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Optimized replacement for smooth unrolling
This is a custom-made replacement insert for common kitchen foil or plastic wrap dispensers (especially the magnetic, refillable models with an integrated cutter).
The original insert of many dispensers often has problems with the width or the roll diameter, which causes the foil to get stuck or not turn at all. This insert solves the problem: the core of the roll glides cleanly on the plastic tube and allows for a smooth, even rotation when pulling out the foil.
💡 Why this model?
Improved unrolling: No more snagging or jamming.
Universally applicable: Fits many refillable dispensers with cutters.
Easy to print: The design is optimized for straightforward production without supports.
⚙ Print Settings (Recommended)
We have optimized the model for maximum durability. While PLA works, we recommend PETG for better longevity in the kitchen environment.
Material: Prusament PETG (Signal White)
Infill: 40% (for good stability of the core)
Supports: Not required (Support-free)
Layer height: 0.2 mm (Standard)
🎁 Free for the community
If it improves your setup, it’s done its job.
Additional notes
If you like this design, please give me a "like" and post your results.