1 / 4
Voron 2.4 Bed Wago 221 Mount with jst-xh spliter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wago 221 + JST-XH spliter for bed thermistor mount for voron 2.4 .
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 135
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
I like bed wago solution for easy maintenance . My Ender3NG have it . so I remixed the E3NG mount to fit a VORON 2.4 .
No need to buy a custom PCB, just 3 2 ways wago 221 and 2 female JST-XH .
press fit the JST-XH connectors like the picture. Plug a FAN or something in each connector. To prevent the pins from breaking while bending and add thermal mass to not melt the connectors while soldering .
Then bend the pins and solder them together .