Toyota Highlander Stereo Facia
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This piece fills in the blank areas to the sides of an aftermarket double-din stereo for a 2002 Toyota Highlander.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 67
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This piece fills in the blank areas to the sides of an aftermarket double-din stereo for a 2002 Toyota Highlander. This should work on any Gen 1, 2001-2007 model with standard audio. (I do not know if it works with the Bose Audio systems.) This is based on a retail purchased part I had that did not work with my new stereo.
I included the Fusion file for any adjustments you might need. Print this STL for the left side, and a mirror image for the right. I printed in PLA because it's the only black filament I had. I think ASA would be a better choice. 0.12 layer height for a nicer finish, with 15% infill.