Sentinel AAT lite - Mount for AKK Diversity RX 5.8G
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting for the AKK fatshark compatible diversity Rx, for the Sentinel Automatic Antenna Tracker Lite.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 36
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Mounting for the AKK fatshark compatible diversity Rx, for the Sentinel Automatic Antenna Tracker Lite.
I choose to do it this way, so that we could read the display on the Rx and more easily make setting changes. With the Rx mounted with the antenna, it would always be at awkward positions/angles.
You might notice a small video transmitter mounted to the side of the tracker. We were using that to re-broadcast the video, so we could sit in the shade and have the tracker in an optimal (sunny) location. Ultimately that did not work well (too much interference between the TX and the RX), so we remoted it with a cable. At about 10 ft distance (min), the rebroadcast worked pretty well. Overall, the tracker has had limited utility, being that it's been too inconsistent in acquiring the plane. It would be nice to see this system modified such that an ELRS receiver could be used (instead of encoding the GPS info on to the video).
Tracking system https://www.virtualpilot.co.uk/index.php?route=product/product&product_id=59
Rx module https://www.amazon.com/AKK-Diversity-Receiver-Compatible-FatShark/dp/B07L2D6FSN
(Don't be hating on the colors! I was using up filament :-)