Radiomaster TX16S Hall Effects Gimbal Protector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gimbal protectors if you're throwing your TX in a backpack or luggage when traveling.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 40
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Thingiverse Customizer didn't work so instead I downloaded OpenSCAD, changed the settings manually, and built the STL that way. After a couple revs, this is what I came up with for the RadioMaster TX16S with the regular Hall effects gimbals and regular stick ends. In case you want to tweak it a bit more, below are the variables I used.
gimbal_face_diameter = 49.5; stick_heght = 30.5; stick_stem_diameter = 5.0; stick_stem_height = 5.5; stick_end_diameter = 10.1; tolerance = 0.2;
I also changed the stick base factor to: stick_base_factor = 1.1;
I printed it in white PLA, which worked fine, then in a black nylon, thinking it would have some flex and be less likely to scratch the gimbal face.
Filament: Generic 230 Nylon and PLA