1 / 6
Hubsan Zino - Zino Pro Tablet Holder — zdjęcie 1
1 / 6

Hubsan Zino - Zino Pro Tablet Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Use larger tablets with your Zino Pro Controller

Ocena
0 / 5
Polubienia
0
Pobrania
4
Wydruki
0
Wyświetlenia
19
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I have an 8" tablet I'd like to use as my screen with my Hubsan Zino Pro quad controller. It won't fit where the phone normally fits, so I made this bracket to hold it.

Edit: I recently switched to a 10" tablet and made a new bracket for it. See files.

I designed it specifically to fit my 8" tablet, which is 120 mm (4-3/4") wide. A wider tablet would work too (though I'm not sure about the stability), but a narrower one might put a bit more of a torque/bend in the clamping mechanism on the controller. The long term effect of using this bracket is not known, so use at your own risk.

Putting the printed bracket over the controller piece is a nice snug fit. It takes some finesse to get it on. (Aim the tabs in at an angle, and then rotate it into place.) Because you might want to re-work the dimensions slightly for your tablet, I've included the Fusion360 CAD file.

I believe it also works with the non-pro Zino controller. (I think they are the same.)

Notes:

You need support for the tab cutout. It seems plenty strong with 2 line walls and 35% fill. However, if you have a $1000 apple tablet in there, maybe you want go with 3 line walls and 100% fill :-)