Pool Net Adapter - Aqua EZ Nylon Pool Skimmer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter part for Aqua EZ Nylon Pool Skimmer (Originally purchased at Lowes)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 29
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Adapter part for Aqua EZ Nylon Pool Skimmer (Originally purchased at Lowes)
A part broke on my pool skimming net. I designed and printed a replacement in PLA. I'm not sure how well it will hold up outside in the sun (but it's likely to be no worse than the original part). Perhaps ABS would have been better.
Originally it was assembled with an aluminum rivet. I drilled that out to remove the part. I re-assembled it with a small stainless steel screw. I drilled a pilot hole for the screw once I had it all assembled.
The spring clip to attach to the pole is https://www.thingiverse.com/thing:19216
Notes:
Perhaps it should have been 100% fill, or even designed a little thicker. I'll see how it holds up. For maximum strength from the filament, I printed it on its side, and used supports.