1 / 4
Battery Cover for Myweigh iBalance 2600 Scale — zdjęcie 1
1 / 4

Battery Cover for Myweigh iBalance 2600 Scale

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement battery compartment cover for the iBalance 2600 Scale

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
13
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I lost the battery cover on my iBalance 2600 Digital Scale. I've had the batteries held in with a big piece of tape for a couple years. A couple days ago I realized designing and printing a replacement cover would make a great project. (I'll be pretty shocked if someone else needs this cover, but here it is on Thingiverse anyhow.)

I printed in PLA. I think any of the common filament materials would work, as long as it provides some springiness for the latch design.

Notes:

To get the strength and flexibility where you need it on the part, you have to print it standing on its end. That's why the STL file is that way. If you flip it and lay it flat, the latch will not flex properly and it will break.

However, because the part is being printed on its end, as it gets taller it flexes slightly when the heatbed moves. This can cause the layers to misalign slightly/randomly. So, PRINT SLOWLY. I printed at about 40 mm/s, with the outer wall printing at about 30 mm/s. If you really want to get into it, you might play with your slicer acceleration/deceleration settings. It takes about 3.5 hours to print.

Put a healthy-sized brim on the print to help it stand up. I used an 8mm brim. Turn on supports.

Tagi