1 / 4
Femobook A2 to Aeropress adaptor
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Grind directly into your aeropress. no supports needed.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 107
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an adaptor that allows you to grind directly into your aeropress with the Femobook 2A. The nubs might be a bit thicker than your aeropress if it is, sand the bottom down a bit.
Some recommended print settings.
Arachne wall generator.
No supports are needed if you have your bridging settings configured well.
0.15mm - 0.10mm layer height