1 / 2
Insert Keter Toolbox
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Open Community License v1
I made these Inserts for my Keter Toolboxes so i could put different screws in there and label them with a label maker
I designed them with a 0.4mm Nozzle in mind and as low in weight as possible with only 10g of filament needed for one
I printed them in PLA but every other filament that doesnt have a problem with overhangs should work perfectly
The Print time on my Voron is around 25 minutes for a layer heigth of 0.2mm
Best to print it angled 45° like in the second picture