LayersFactory
Zgłoś model
1 / 4
Analogue TED Tree — zdjęcie 1
1 / 4

Analogue TED Tree

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Standard Digital File License
SzczegółyWydruki i komentarzeRemiksyKolekcjePowiązane

I tried forever to design a test tube style rack for analogue TEDs, but the issue is that they vary a great deal in terms of width and length, so it popped in my head one day that a tree style stand might suit the same purpose but allow for the variance in stem size, etc... and so, the Analogue TED Tree was born.  

This design is two pieces; the tree stand itself, which supports up to 10 TEDS in a horizontal orientation, and the cap/top which has space for an additional 2 TEDs in a vertical orientation, with a small shelf between.  

Print Settings: 

  • Either 0.2mm or 0.15mm layer height should work

  • 20% Cubic Infill

  • 4 Permiters (for stronger tree shelves)

  • Supports will be required, organic/tree is best

  • Print in the saved orientation.  For those with smaller printers (A1 Mini), you may need to do it in two prints. 

Uses ~140g of filament at 0.15mm layer height. 

Tagi

standtreeanaloguebingtedsbingsbuddery