Edifier MR5 Extreme Angle Speaker Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Used this stand for my sim racing setup as the speakers sit on the floor.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 216
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
Used this stand for my sim racing setup as the speakers sit on the floor. This base allows the speaker to face up towards the driving seat, making for much better audible difference in sound delivery, compared to the speaker just sitting flat on the floor.
All assembled with only dowels and super glue. Perfect alignment with the dowels and built in speaker rubber feet holes, removing the need for a back guard. The speaker just sits in the holes and the forward/downward weight distribution keeps it in place. You will need to remove the rubber feet from your speaker and place them on the stand, then place the speaker on the stand to stick them on in the position that fits the stand spacing. This is due to the speaker coming from the factory with unevenly placed feet, which can't be accounted when creating the CAD, so I just made them all perfectly 45 degrees from each corner.
I've added optional TPU feet you can print for the stand to reduce any movement depending on the substrate you place it on, and also reduces vibration from the plastic stand on your floor. The model has been tweaked some more post the images been taken, but is essentially the same.
Enjoy!