Binocular Tripod Mount, 1/4-20 & Arca Compatible
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Binocular tripod mount, 55 & 80 mm height. Compatible with 1/4-20 & Arca tripod bases.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 34
- Wydruki
- 1
- Wyświetlenia
- 148
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
For any binocular with 1/4"-20 female front mount. Designed for binoculars with up to 50 mm objectives. I use these with my Vortex Ranger HD R/T 10x50 binoculars.
2 lengths provided 80mm, 55 mm. The shorter one will fit in most binocular cases while attached.
Features
1/4-20 compatible base. Choose from 2 different attach points, depending on the balance point of your binoculars.
Arca Swiss compatible base.
Post is tapered at the top to work with up to 50 mm objective diameter.
Post gussets for lateral stiffness.
For mounting on a tripod with a screw mount base, requires 1/4-20 x 5/16" L heat set insert. e.g. Amazon ASIN B0F9WD4Y54.
Attach to binoculars with 1/4-20 x 0.75" thumbscrew. e.g. Amazon ASIN B0D9DGHC5X.
Print Recommendations
PETG.
Orient part with back of post on the base plate.
25%+ infill, 3 wall loops for stiffness.
Supports: on for clean heat set insert holes.
If it works for you, please Like. A Make is always appreciated.