HeadAmame eXtra Bass, Speaker Shim
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple shim to bring the driver closer to the ear, Moar Bass, More Volume, less subtlety.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 85
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple shim to bring the speaker closer to the ear, more bass, more treble, loss of subtlety.
The Z height is set to 3mm but you can adjust the z height in the slicer.. (remember to uncheck uniform scale)
Anything more than 2mm will probably need longer screws. M3x25, is standard so M3x30 (untested)
This maybe as I've used Brainwavz XL earpads, these are quite deep, placing the speaker far away.
The shim is NOT symmetrical, so try it in all positions and see what fits best.
This should fit all the speaker holders 50mm and 40mm
The Shim here is printed in TPU with 6 walls. This I thought might make it easier to install and add isolation.
I think PETG will also be fine.
I think a 5mm shim would be best but I need to purchase longer screws.