Switch 2 Side Rail Slot Inlay (Simple Design | Tight Fit)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inlay designed to cover the stickers in the rail slots of the Nintendo Switch 2
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Nintendo really messed up when they used blue and orange stickers in the Switch 2 rail slots. It's like they forgot they were going to release Joy-Con 2 in other colors. While you could pull the stickers off and replace them with neutral ones from ExtremeRate, that may void your warranty. So I went in search of a different solution.
@Protojump_2910317 released a complete set of "Switch Swatches" to cover the stickers in the rail slots of the Nintendo Switch 2. I tried printing a set, but they kept falling out. So I ended up taking measurements and making a new set that fits tightly in the groove.
I wanted to keep it simple. I left off the plus and minus marks, so the model would work great in both the left and right rail. The magnets still work great while the inlays are installed. To remove them, you simply attach a piece of tape to the inlay and pull it out of the groove.