Basic Picture Frames for 4x6, 5x7
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
The trim pieces can be printed in a different color from the backing if you wish, since they are separate pieces. Just use CA glue to join the pieces together and then (when dry) slide the picture into the thin slot on top.
If you use the optional wall hanger, then you will need two M3x4x5mm heatset inserts and two M3x6 screws.
Backing: 0.25 layer height, 15% Gyroid infill, 3 walls
Trim: 0.1 layer height, 15% infill, 3 walls (Smooth bed plate works best here)
All other pieces: 0.2 layer height, 15% infill, 3 walls
Wall Hanger: 0.1 layer height, with a brim. Print with the tooth edges facing upward
Will add more variations of the trim pieces as time permits! Happy printing!