Grimmspeed "The Bolt" Oil Cap Tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tool to get a better grip on 'The Bolt' as I had issues with mine getting stuck after a few track days
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 1
- Wyświetlenia
- 56
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- GNU General Public License v3.0
Do you have 'The Bolt' oil cap on your subaru cos it looked pretty?..
Have you tried to take 'The Bolt' off after a few heat cycles and now 'The Bolt' is stuck?!
Well you're not alone, So i've made this tool that slots over the top of it and will give you the extra grip/torque needed to take 'The Bolt' off.
I have made this out of PLA but if you use it while the engine is freshly hot it gets too soft so I made one out of ABS and I don't have any issues afterwards.
The 3MF file is configured to use PLA so use the STEP or STL files to configure your own print settings.
The model was designed for tight tolerences on my CoreOne so you may need to scale up the part to suit the tolerances on your 3D printer.
(If you're wondering what this 'Bolt' is here's where you can buy it https://www.grimmspeed.com/products/grimmspeed-v2-bolt-oil-cap)