1 / 2
Bird Air Quality Monitor (with base support) — zdjęcie 1
1 / 2

Bird Air Quality Monitor (with base support)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This "Birb" remix uses a support standard to showcase your air quality monitor on a shelf or dressoir.

Ocena
0 / 5
Polubienia
4
Pobrania
7
Wydruki
0
Wyświetlenia
134
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Share Alike

The Birb is the Word!

This model is a functional, DIY alternative to the Canairi sensor. While the original design was loved for its aesthetic, high-quality sensors and connectivity, this version focuses on the desk or shelf support.

Key Features

  • Smart Home Ready: Shares sensor data over MQTT to platforms like HomeAssistant.

  • Sensors: Designed specifically to use high-accuracy gas and temperature modules.

  • Flexible Power: While designed for USB-C power, the internal Feather board supports LiPo battery charging if you choose to add one.

Materials

To complete this build, you will need:

  • Microcontroller: Feather format (e.g., Unexpected Maker Feather ESP32-S2).

  • Servo: SG90 Micro Servo.

  • Gas Sensor: Adafruit SGP40 (or SGP30 with code adjustments).

  • Environment Sensor: Adafruit AHT20 or BME680.

  • Hardware: 3 x M3 nuts and machine screws, Adafruit USB-C breakout board, and QT/ST connector cables.

Print & Assembly Notes

  • Print Files: Optimized for Prusa MK3/S/S+ using a 0.4mm nozzle.

  • Assembly: Most parts are held with a small dab of superglue, though the sensor boards are designed for a snug push-fit.

Tagi