Sewing machine presser foot for strings /paraglider lines
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
different feet for industrial and singer supera machines allowing to assemble paragliders lines from Ø0.65mm to Ø2.5mm
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 250
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
For really thin lines, it's important to make sure your needle is centered properly in relation to the foot. If not, which is common, you can modify the .sldprt file to compensate by moving the mounting bracket aside.
This allows you to do zigzags on double braids or straight seams for splices.
On the Singer Supera, you will also see that the selected zigzag width impacts the left-right position of the stitching compared to the foot. Therefore, the different sizes of feet are not centered in the same way.