Lightsaber Stand — Single Print, Display Blade Lit or Unlit | STEP File Included
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A minimal, stable stand designed to display your lightsaber the way it deserves.
- Ocena
- 0 / 5
- Polubienia
- 4
- Wydruki
- 0
- Wyświetlenia
- 53
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Standard Digital File License
A minimal, stable stand designed to display your lightsaber the way it deserves without clutter. Prints in a single part with no assembly or hardware required.
The cylinder holes aren't just aesthetic — when your blade is lit they glow through, turning the stand into part of the display. Designed with a heavy grade blade in mind, the four-leg base keeps everything stable without tipping.
Built for the Sabertrio Korvus with a heavy grade blade, but fits any saber with standard blade dimensions — 26mm inner diameter covers the vast majority of hilts in the hobby.
What fits: Inner diameter is 26mm — standard blade size in the lightsaber hobby. Check the included technical drawing against your hilt diameter before purchasing if unsure.
Included files:
Print-ready STL
STEP file for modifications
Technical drawing of inner diameter for fit verification
Print Settings:
Material: PLA (PETG recommended for added strength)
Walls: 3
Infill: 20% Cubic
Supports: Yes — cylinder interior
Layer height: 0.2mm
Notes: Rubber feet on the base are recommended for stability and surface protection. Print in black for best results — the contrast makes the glow effect significantly more striking.