Starlink v2 Dish 2" Pole Mount (with 1-7/8" variation)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This allows for the mounting of a v2 Starlink dish on a 2" & 1-7/8 pole. It is secured with a standard clamp.
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 179
- Wydruki
- 1
- Wyświetlenia
- 2065
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Share Alike
This bushing will allow for the attachment of the Starlink v2 (rectangular) dish to a standard 2" flagpole. It is secure with a simple worm clamp. There is an indent in the bushing that will allow the dish to log into place with its built-in mounting lock.
I printed this in ASA (for UV protection) at 50% infill. I tested going about 50% and did not feel it added any strength.
This was created in TinkerCAD if you would like to edit it, you can here.
Added a model for a 1-7/8" pole from Home Depot.