Hotwheels Toyota AE86 Display Base (TRD Theme)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A base for Hotwheels Toyota AE86, the one in pictures are from Slide Street set.
- Ocena
- 5 / 5
- Polubienia
- 66
- Pobrania
- 130
- Wydruki
- 2
- Wyświetlenia
- 1752
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068
Custom display base are also available from $5! Contact me to discuss what you want!
If you like my work, you can support me Printables Clubs! Just click the “Support & Join” button beside my name or here: https://www.printables.com/@GigaPenguin#join:279
Exclusive models are included too!
You can also support me through Patreon too: https://www.patreon.com/gigapenguin3dprints/posts
Description
The display will fit all Hotwheels release of the same casting. It is not tested with the older AE86 casting, if you want the base to fit that casting please send me the dimensions indicated here: https://imgur.com/5T6mb2L
The display base is separated into 3 parts for easy printing and colour swap. The parts are:
1) Base
- BaseV2.STL
2) Base back wall:
- BoxBackAssem.STL
Print Settings
Nozzle size = 0.3 mm (0.4 should be printable but smaller better)
Layer height = 0.2 mm
Filament change layer for colours on "BaseV2":
- Start (Left stripe colour, mine is in yellow)
- Layer 6 (Middle stripe colour, mine is in orange)
- Layer 11 (Right stripe colour and TRD logo background, mine is in red)
- Layer 16 (Overall base colour and TRD lettering colour, mine is in white)
Filament change layer for colours on "BoxBackAssem":
- Start (Background of the wall, mine is in white)
- Layer 9 (Left stripe colour, mine is in yellow)
- Layer 14 (Middle stripe colour, mine is in orange)
- Layer 19 (Right stripe colour and TRD logo lettering, mine is in red)
- Layer 24 (Racing Department lettering colour, mine is in black)
Assembly
The car is tied by wires through the hole in the base
Back plate should slide in nicely into the display base.
Others
Feel free to send me any feedback on how to improve the design. Suggestion on display base designs are welcomed too.
I can be contacted through Instagram or Twitter too:
Twitter: https://twitter.com/Giga_Penguin
Instagram: https://www.instagram.com/GigaPenguin3DPrinting/
Custom display base designs are available for $5! Contact me to discuss what you want!