Nerf Compatible Blaster Stock — Modular Truss Design, Standard Stock Lug Compatible | STEP File Included
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Standard Digital File License
A lightweight but rigid stock attachment for foam blasters with a standard stock lug. The open truss structure keeps weight down without sacrificing rigidity — designed to look as good as it functions.
Prints in 3 separate files — mix and match colors freely without any multi-material unit. Just print each part in whatever color you want and assemble.
Compatibility: Fits standard foam blaster stock lugs. Not compatible with spring-powered blasters due to differences in their stock attachment point design. Check your blaster's lug type before purchasing.
Included files:
Print-ready STLs (3 parts)
STEP file for modifications
Print Settings:
Material: PLA
Walls: 5 — critical, do not reduce. Thin geometry relies on wall count over infill
Infill: 100% Grid for brace section, 20% Cubic for attachment point and stock pad
Supports: No
Layer height: 0.2mm
Notes: Wall count matters more than infill here — the truss geometry is thin in places and walls are what carry the load. Do not print the brace with sparse infill.
Spring-powered blaster compatibility may come in a future version.