Wingspan Card Holder — 3 Slots, Bird Silhouettes

A 3-slot card holder for Wingspan (or any tabletop game with 55 × 90 mm sleeved cards). Each cell has a different bird silhouette — kiwi, sparrow, eagle — engraved into its back wall and filled with a contrast-color inlay. When a card sits in the slot, the bird is hidden; remove the card and the bird is revealed. Pure flavor, but it makes putting cards back on the rack a small joy.

• Outer dimensions: ~210 × 40 × 32 mm

• Holds 3 cards, ~70% of each card visible above the back fence

• Cards lean back at 20° (cup-style), kept upright by a low front lip

• Bird inlays sized 16 mm — visible from above when the slot is empty

Two-color print (Bambu Studio + AMS)

Two STL files in this listing share the same coordinate frame:

• card_holder_body.stl — main shell (tray, walls, dividers, back fence with bird-shaped pockets)

• card_holder_inlays.stl — three thin bird plugs that fill the pockets

Import both at once (drag both files into Bambu Studio in one drop, or File > Import with both selected). They will land aligned — inlays sit exactly in the body's pockets. Assign filament A to the body and filament B to the inlays. Slice and print.

If you don't have AMS, print just card_holder_body.stl — the bird silhouettes still read clearly as engraved recesses on the back walls.

Print settings

• Bambu Lab P2S or any 0.4 mm FDM

• 0.2 mm layer height, 3 walls, 15-20% infill

• PLA Basic — works perfectly. PETG also fine.

• No supports. The back wall leans 20° from vertical (well within overhang limits), the front lip is short, and the inlays are flat thin extrusions.

• Print flat on the bed, body's tray-bottom face down. Inlays lay flat alongside.

Source

Full parametric .scad is included. Variables at the top control card dimensions, cell count, back-wall tilt, lip height, bird silhouette size, and engraving depth. Want 4 slots instead of 3? Change n_cards and re-export. Want different birds? Drop new SVG silhouettes into the folder and update bird_files.

Fan content for Wingspan by Stonemaier Games — not affiliated.