Ender 5 belt tensioner X & Y /Ender 5 Riemenspanner X & Y
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ender 5 Riemenspanner X & Y Ich habe den Riemenspanner von kmxs mir angeschaut und mir gefiel die Kompaktheit des…
- Ocena
- 4,5 / 5
- Polubienia
- 40
- Pobrania
- 252
- Wydruki
- 6
- Wyświetlenia
- 1669
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Ender 5 Riemenspanner X & Y
Ich habe den Riemenspanner von kmxs mir angeschaut und mir gefiel die Kompaktheit des Spanners. https://www.thingiverse.com/thing:3601830
Ich habe mir den Body etwas angepasst und daraus eine Variante für X und Y gemacht
Für den Ender 5 benötigz ihr:
1x Riemenspanner X ( Riemenspanner_X_Ender_5_v4.stl)
2x Riemenspanner Y ( Riemenspanner_Y_Ender_5_v16.stl)
3x Belt_Tentioner_Nut.stl (von kmxs siehe Link oben)
3x Belt_Tentioner_Thread.stl (von kmxs siehe Link oben)
3x https://www.thingiverse.com/thing:4089738 (Adapter M5 auf Kugellager D8)
zudem benötigt ihr 3x Schraube M5x25 und 3x Sicherungsmutter M5
Weitere Informationen zu meinen Drucker Modifikationen findet ihr hier: http://jogiarea.de/
Ender 5 belt tensioner X & Y
Update 08.10.22
Ich habe ein Teil "Threaded part with long thread and flared shaft" hinzugefügt, diese bitte nur verwenden, wenn es Probleme mit der Riemen oder Gewindelänge mit dem Originalteil von https://www.thingiverse.com/thing:3601830 gibt
Das Teil wurde von mir nicht getestet
------------------------------------------------------------------------
I looked at the belt tensioner from kmxs and I liked the compactness of the tensioner. https://www.thingiverse.com/thing:3601830
I adapted the body a little bit and made a variant for X and Y.
For the Ender 5 you need
1x belt tensioner X ( Riemenspanner_X_Ender_5_v4.stl)
2x Belt_Tensioner Y ( Riemenspanner_Y_Ender_5_v16.stl)
3x Belt_Tentioner_Nut.stl (from kmxs see link above)
3x Belt_Tentioner_Thread.stl (from kmxs see link above)
3x https://www.thingiverse.com/thing:4089738 (Adapter M5 to ball bearing D8)
you also need 3x screw M5x25 and 3x locknut M5
More information about my printer modifications can be found here: http://jogiarea.de/
Update 08.10.22
I have added a part "Threaded part with long thread and flared shaft", please use this only if there are problems with the belt or thread length with the original part of https://www.thingiverse.com/thing:3601830
The part was not tested by me
Print Settings
Printer Brand:
Creality
Printer:
CR-X
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0,2
Infill:
60%
Filament: You want PETG
Notes:
For Belt_Tentioner_Thread.stl use 100% Infill
For rest, use four outlines
Category: 3D Printing