Nerf Rival Takedown Shotgun Stock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of Gemeneye's Takedown Grip/Stock Attachment Point into a traditional shotgun stock
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 389
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix of Gemeneye's Takedown Grip/Stock Attachment Point into a traditional shotgun stock. The large stock piece should be cut according to the size of your printer's print bed with appropriate connectors. I used large square connectors in Bambu Studio for a strong connection. STEP files are included for you to make modifications to as you'd like!
Settings:
Filament: Black PETG
Walls: 5+
Infill: 20%
Supports: Yes
Orientation: Flat for strength
Hardware: Original screws from the old grip, fast set epoxy (recommended)
Note: The nub connecting the rear stock point and grip halves snapped on me the first time I tried this. I would recommend using fast-set epoxy to just glue the stock to the grip halves once you've installed the trigger. Note this is permanent and it will be difficult to access the trigger internals after epoxy.